// PAWTUCKET, RI · CHIMNEY SERVICE
Chimney Services in Pawtucket
Ensuring your chimney and fireplace are safe and efficient.
Skilled Team
Our technicians are trained and experienced, ensuring every job is done right the first time.
Comprehensive Services
We handle everything from cleanings to complex repairs, giving you one place for all your chimney needs.
Local Focus
We understand the specific needs of Rhode Island homes, adapting our services to local conditions.
Customer-Oriented
Your satisfaction is our priority. We take the time to address your concerns and offer personalized solutions.
FIG. 1 — SECTION THROUGH A MASONRY CHIMNEY
// SERVICES
Spec sheets
Chimney Cleaning
Ensure your chimney is clean and safe with our thorough cleaning services.
S-02Chimney Inspection
Regular inspections ensure your chimney's integrity and safety.
S-03Chimney Repair
Keep your chimney safe and functional with our repair services.
S-04Chimney Cap Installation
Protect your chimney with a new, well-fitted chimney cap.
S-05Creosote Removal
Remove hazardous creosote buildup for a safer chimney.
S-06Chimney Relining
Ensure chimney efficiency and safety with a new liner.
S-07Fireplace Cleaning
Keep your fireplace looking and functioning at its best.
S-08Dryer Vent Cleaning
Prevent fires and improve dryer efficiency with vent cleaning.
S-09Masonry Repointing
Restore your chimney's structure and appearance with expert repointing.
S-10Chimney Waterproofing
Protect your chimney from water damage with effective waterproofing.
// ANATOMY
Click a part of the chimney
PART 01
Chimney cap
The chimney cap sits at the top of the chimney, acting as a cover to prevent rain, debris, and animals from entering the flue.
- It can become damaged or dislodged due to weather.
- Rusting or deterioration might occur over time.
- Blockages from debris can impede its function.
PART 02
Crown
The chimney crown is a protective concrete or stone top surface of the chimney, designed to shed water away from the flue and masonry.
- Cracks can form, allowing water to seep in.
- Deterioration from weather exposure.
- Poor construction can lead to ineffective drainage.
PART 03
Flashing
Flashing is the metal or waterproof material that seals the joint between the chimney and the roof to prevent water leaks.
- Corrosion or rust leading to leaks.
- Improper installation can cause sealing issues.
- Shifting or settling can create gaps.
PART 04
Brick and mortar
These are the bricks and mortar that make up the structure of the chimney, giving it stability and aesthetic appeal.
- Mortar joints can degrade over time.
- Bricks may crack from freeze-thaw cycles.
- Spalling bricks due to moisture penetration.
PART 05
Flue liner
The flue liner is a layer inside the chimney that protects the masonry from heat and corrosion, while improving efficiency and directing smoke out of the home.
- Cracks or deterioration can occur.
- Blockages from creosote buildup.
- Improper sizing for the appliance.
PART 06
Smoke chamber
The smoke chamber funnels smoke from the firebox into the flue, helping it smoothly exit the chimney.
- Creosote can accumulate, reducing efficiency.
- Cracks can form, allowing gases to escape into the home.
- Poor construction may lead to uneven airflow.
PART 07
Damper
The damper is a movable plate or valve in the chimney that regulates airflow and helps seal the chimney when not in use.
- Rust or warping can prevent proper sealing.
- Debris can obstruct its movement.
- The seal might wear out, reducing energy efficiency.
PART 08
Firebox
The firebox is the area within the fireplace where the fire is contained and burns.
- Mortar joints can crack under heat stress.
- Bricks can spall due to heat exposure.
- Buildup of soot and debris can occur.
// FIELD PHOTOS
// TROUBLESHOOTING
What you notice, and what it usually means
| Ref | Symptom | Likely cause | Service |
|---|---|---|---|
| T-01 | Smoke entering the home | There may be a blockage or drafting issue. | Chimney Inspection |
| T-02 | Visible cracks in chimney | This could indicate structural damage. | Chimney Repair |
| T-03 | Water leaks around chimney | The chimney may need sealing or cap repair. | Chimney Waterproofing |
| T-04 | Strong odor from fireplace | This often points to creosote buildup. | Creosote Removal |
| T-05 | Difficulty starting a fire | There might be a drafting problem. | Chimney Inspection |
| T-06 | Excessive ash buildup | A thorough cleaning is needed. | Fireplace Cleaning |
// PROCESS
The visit, as a flowchart
- STEP 1
Initial Consultation
We begin by understanding your needs and assessing the condition of your chimney or fireplace.
- STEP 2
Detailed Inspection
Our team conducts thorough inspections to identify any issues that need to be addressed.
- STEP 3
Service Execution
With a clear plan in place, we perform the needed services efficiently and with care.
- STEP 4
Post-Service Review
After completing the service, we review the work with you to ensure satisfaction.
- STEP 5
Ongoing Support
We remain available for any follow-up questions and future maintenance needs.
// BOOK
Open a work order
Welcome to Emberlyn Chimney & Fireplace Service, where we take pride in making sure your home's chimneys and fireplaces are functioning safely and properly. Our experienced team is committed to providing high-quality services tailored to meet the needs of homeowners in Pawtucket and the surrounding areas.
SERVICE AREA
- Pawtucket
- Central Falls
- Cranston
- East Providence
- North Providence
- Providence
- Johnston
- Monday7:00 AM – 6:00 PM
- Tuesday7:00 AM – 6:00 PM
- Wednesday7:00 AM – 6:00 PM
- Thursday7:00 AM – 6:00 PM
- Friday7:00 AM – 5:00 PM
- Saturday8:00 AM – 2:00 PM
- SundayClosed
Q01How often should I have my chimney cleaned?
Chimneys should be cleaned at least once a year to prevent the buildup of creosote and other debris. This helps ensure safety and efficiency.
Q02What are the signs my chimney needs repairs?
Cracks, leaks, or a strong smoky smell can indicate your chimney needs repairs. Regular inspections help catch these issues early.
Q03Why is chimney inspection important?
Inspections can identify blockages, structural issues, and creosote buildup, preventing potential hazards and maintaining efficient operation.
Q04What is creosote and why is it dangerous?
Creosote is a byproduct of burning wood that can build up in the chimney. It is highly flammable and can lead to chimney fires if not removed.
Q05Can I use my fireplace during the inspection?
It's best to avoid using the fireplace before an inspection to ensure safety and accurate results.
Q06How long does chimney service take?
The duration depends on the service type and condition of the chimney. We provide clear timelines after assessing your situation.
Q07What is a chimney cap and do I need one?
A chimney cap prevents rain, debris, and animals from entering your chimney. It's a valuable addition for protection and efficiency.
Q08Why is masonry repointing necessary?
Masonry repointing helps repair deteriorating mortar joints, maintaining the structural integrity of your chimney.